1
Pick 2 A screws and a C screw. Remark: A screw is little longer than C screw.
2
Follow instruction to put screws in proper place. Screw in half way until the screw is breaking through the board slightly.
3
Follow instruction to put music movement in proper place.
4
Tighten all screws.
5
Make sure there is no gap between music movement and the board.
6
Turn the knob clockwise to check if music movement functions well.
7
Insert the post to the end.
8
Follow the convex and concave mark. Put the board back to the base.
9
Make sure it is “ON” . Turn the knob to check if music movement functions well.
10
Take out the board and put aside.
11
When assembling figures may leave wood dust, we suggest to fasten the board in the final step.
12
Follow the convex and concave mark. Put the board back to the base.
13
Use thin cross screwdriver. Tighten all B screws.
14
It is done.